﻿At the end of the staircase time, the actuator for the dimming output concerned displays the configured behaviour here. The output can be set to switch off immediately or alternatively to execute a pre-warning function.

*switch off*: At the end of the staircase time, the actuator switches off the switching output concerned.

*Activate pre-warning time*: At the end of the staircase time, the switching output can generate a pre-warning prior to switching off. The pre-warning, for example, should warn any person still on the staircase that the light will soon be switched off.

*Activate reduced continuous lighting*: After the switch-on time has elapsed, the actuator activates reduced continuous lighting for the dimming channel concerned. The reduction of the lighting to continuous lighting is appropriate, for example, if a certain degree of artificial light should be switched on permanently in long, dark hallways. Switching to switch-on brightness by activating the staircase function normally takes place by additional presence detectors or motion detectors when people are present in the hallway. The continuous lighting remains permanently active after the switch-on time has elapsed. Only when an ON telegram is received again via the object "Staircase function start/stop" does the actuator switch back to the switch-on brightness and start counting the switch-on time again.
